Register Now
You need to be registered to access all features and be part of the community.
Don't worry it's free !
Register Now
Lost Password
Lost your password? Please enter your username and email address. You will receive a link to create a new password via email.
Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ----- Post updated at 08:17 AM
Read More
Ratings : 53 %
Configuring iSCSI on Sun PCI ExpressModule with iSCSIUTL :
Ratings : 18 %
QLogic KnowHow: Installing QLogic Adapters in VMware ESXi 5.x Environment :
Ratings : 69 %
cfgadm and fcinfo commands can be used to list all the LUNs presented to a HBA or a disk controller in Oracle Sun Solaris 10
Read More
Ratings : 33 %
ESXi 5.0 Install stuck at loading module megaraid_sas :
Ratings : 71 %
A. To get List of HBA card installed on server : #lspci | grep -i fibre B. To View used HBA ports on server: #ls -lrt /sys/class/fc_transport/ drwxr-xr-x 2 root root
Read More
Ratings : 54 %
Dell PowerVault Tape Connectivity to Supported Dell HBAs and Cables :
Ratings : 69 %
Flashing Sun PCI ExpressModule with iSCSI Firmware from Intel :
Ratings : 21 %
ArchLinux: Booting from HP Proliant DL380 G5 :
Ratings : 44 %
SEIES 7H DATA SHEET PMCSierra Inc 1380 Bordeaux Dr. Sunnyvale, CA 408 USA Tel 1 (408) 23-8000 Copyright PCSierra, Inc All rights reserved PC, PCSIRRA and Adaptec …
Read More
Ratings : 69 %
The part numbers for the Brocade 8Gb FC Single-port and Dual-port HBAs include the following items: FC HBA adapter with one or two SFPs installed and 3U bracket attached
Read More
Ratings : 17 %
Boot From iSCSI :
Ratings : 65 %
QLogic KnowHow: Boot from SAN Configuration using Fast!UTIL :
Ratings : 21 %
How to enable num lock in Windows 8 at startup :
Ratings : 62 %
How To Configure Reverse NPIV Gateway on Alcatel-Lucent OmniSwitch 6900 :
Ratings : 53 %